Fire Hose with Brass or Aluminum Fittings
Welcome to H&R Fire & Safety, Inc.
Retail sales of premium quality Fire Hose with Brass or Aluminum Fittings, Fire Nozzles, Fire Hose Racks, Fire Hose Reels.
A $10 processing fee will be added to orders of less than $100.
Extra shipping cost may be required for Hawaii & Alaska
Please call us at 770-382-7650 or FAX us at 770-386-6497.
You may also contact us via e-mail at info@hrfiresafety.com.
Fire Hose
|
|
|
Fire Hose, Brooks RACK AND REEL FIRE HOSE is fully lined and FM approved. Has an acceptance test pressure of 500 psi and a service test of 250 psi. Each section comes already folded for ease of installation on pin racks.
Fire Hose, Brooks 50NST, 50' x 1 1/2" Brass
Fire Hose, Brooks 75NST 75' x 1.5" Brass
Fire Hose, Brooks 100NST 100' x 1.5" Brass
|
|
|
Fire Hose, Brooks SINGLE JACKET FIRE HOSE has a burst pressure of 750 psi, an acceptance test pressure of 500 psi, a service test of 250 psi and is FM approved. Made of 100% polyester, rubber-lined material for strength and flexibility. Recommended for industrial fire protection.
|
$198.95
$196.95
$259.95
$257.95
$334.95
$330.95
$309.95
$311.95
$399.95
|
|
|
Fire Hose, Brooks SJ50NST 50' x 1.5" Brass
Fire Hose, Brooks SJ50ANST 50' x 1.5" Aluminum
Fire Hose, Brooks SJ75NST 75' x 1.5" Brass
Fire Hose, Brooks SJ75ANST 75' x 1.5" Aluminum
Fire Hose, Brooks SJ100NST 100' x 1.5" Brass
Fire Hose, Brooks SJ100ANST 100' x 1.5" Aluminum
Fire Hose, Brooks SJ2550NST 50' x 2.5" Brass
Fire Hose, Brooks SJ2550ANST 50' x 2.5" Aluminum
Fire Hose, Brooks SJ25100NST 100' x 2.5" Brass
|
|
Rack and Reel Fire Hose is fully lined and FM Labeled. Has an acceptance test pressure of 500 PSI and a service test of 250 PSI. Each section comes already folded for ease of installation on pin racks. NOTE: This inexpensive lightweight hose is designed for use as emergency fire hose only! It should never be used for wash down or any other purpose. U.L. Labeled rack and reel fire hose is available for an additional fee.
Single Jacket Fire Hose has a burst pressure of 750 PSI, an acceptance test pressure of 500 PSI, a service test of 250 PSI and is FM Labeled. Made of 100% polyester, rubber lined material for strength and flexibility. Recommended for industrial fire protection.
U.L. Labeled Single Jacket Fire Hose has a burst pressure of 750 PSI, an acceptance test pressure of 500 PSI and a service test of 250 PSI. Made of 100% polyester, rubber lined material for strength and flexibility. Recommended for industrial fire protection.
Double Jacket Fire Hose has a burst pressure of 1200 PSI, an acceptance test pressure of 800 PSI, a service test of 400 PSI, meets NFPA 1962 and is FM Labeled. Made of 100% polyester, rubber lined material for strength and flexibility. Recommended for industrial fire protection.
Yellow Polymer Impregnated Fire Hose has the same specifications as our standard double jacket hose except that the outside jacket is independently and completely impregnated with abrasion resistant, water repellent polymer. Available in aluminum couplings only.
Rubber Covered Fire Hose has a burst pressure of 800 PSI, an acceptance test pressure of 500 PSI, a service test of 250 PSI and is FM Labeled. Abrasion and heat resistant nitrite synthetic one-piece cover and liner. Impervious to water, oil, gas and most chemicals. Lightweight and virtually kink resistant for ease of handling. No drying required! Tested to and coupled to NFPA 1961 standard and comes FM Labeled. Available in aluminum couplings only.
|
